簡述

Summary

本反光對焊機是輪子輪輞對焊的共公設備，其鋁件的夾緊、對焊均為液壓式式動力，對焊性能參數可由觸感屏設制，符合自覺化含量高、世界任務靠經得住、調濟生活便利等蘇州特色。這個機器由主機結構、高壓電器保障風險管理體系、液壓式式保障風險管理體系三部曲分帶來。The model of welder is the dedicated equipment for welding rim and disc. Its clamping and upsetting drive by hydraulic system, the welding parameters can be set from touch screen, and it features a high degree of automation, reliable operation, easy adjustable, etc. The welder is made of host, electrical system and hydraulic system.

技術地方特色

閃耀對焊機是車轱轆輪輞電焊的公供轉備，電焊性能參數由觸屏屏重設，活躍化水平面高、作業靠受得了、專業調劑友盒等蘇州特色。好用清理了高強板電焊穩固及焊口硬度。智能安防系統化：由伺服電機閥控制閃頻燒化的程序運行，使電焊始終不變，前呼后應效率快。對于板厚為差其它輪輞，都可以挑選到前呼后應的電焊檔位。生長標識基本原則：實現智能工廠化主產，部件主動地大小料設備，實現前呼后應設備配套。

機械制度

Electrical System

機械制度其中包含焊結主控制電路設計和規范控制電路設計。Electrical system includes welding main circuit and control circuit.(1)焊結工藝主電路板由主旋轉電觸點控制開關QS、可控硅旋轉電觸點控制開關KP和干式變電器TC3等產生。主旋轉電觸點控制開關QS使用接入正常和圍堵焊結工藝漏電控制開關供電系統輸出功率降，當專業調劑干式變電器級數或焊機經久不比時，應斷電QS。可控硅旋轉電觸點控制開關在焊機成就時使用接入正常或關斷焊結工藝輸出功率降。干式變電器TC3使用供求優越性輸出功率降級的焊結工藝輸出功率降，共8級。Welding main circuit is composed of the main switch QS, thyristor switch KP and transformer TC3. The main switch QS is used for switch-on and turn-off the power supply of welding circuit, it shall be turn off if adjust welding transformer series or long time on use. The thyristor switch KP is used for switch-on or turn-off the welding power when welder is running. The transformer TC3 is used for supplying different welding voltage which is total 8 series for this model.(2)合理線路由PLC的模擬輸送/模擬輸送線路、操作件、觸控屏等購成。PLC是合理線路的的點，焊機按PLC的西式世界級任務，彎曲商品編號器經傘齒齒條與動板相接，用作檢查測量動板的位移，其準確度為35脈沖激光激光/mm。PLC遵照脈沖激光激光旌旗燈號合理動板的變速器和控制回路，觸控屏用作督察焊機世界級任務，并可按明確提出點竄技術參數。Control circuit is composed of PLC input/output circuit, operation element and touch screen etc. The PLC is the core of control circuit, and the welder will run according to the programs of PLC. The rotary encoder is connected with movable plate through pinion and rack which is used to detect displacement of movable plate, with accuracy of 35pulse/mm. PLC will control the speed and reversing of movable plate according to the pulse signal. Touch screen is used to monitor welding operation, amend parameter in line with welding requirements.

液壓式制度

Hydraulic System

油缸多路閥風險管理機制由油缸多路閥站、管道和電腦服務器上的油缸、閥等包含。油缸多路閥站使用在總需求風險管理機制各種經濟水壓。電腦服務器上的閥組使用在有節制各油缸的任何，此中頂鍛各種經濟水壓、夾緊各種經濟水壓、加溫各種經濟水壓可以零丁才能購買到合適的，并有各種經濟水壓表顯現出來才能購買到合適的值，在頂鍛油缸裝還有一個定位才能購買到合適的閥，使用在才能購買到合適的動板發展時的帶寬。

、The hydraulic system is composed of hydraulic station, piping, oil cylinder and valve of host. Hydraulic station supplies the system pressure. The valves of host control the oil cylinders. The upsetting pressure, clamping pressure and pre-heating pressure can be adjusted separately which display the adjustment value by pressure gauge. And the upsetting oil cylinder is equipped with a lever regulating valve which is used for adjusting the forward speed of movable plate.

手藝活數據報告

Specification

裝備型號	Model Number	UNB3-600-A
主電路額外輸出電壓 單相	Rated Input Voltage of Main Power Circuit	AC 400~430V, 50Hz, single phas
節制電路額外輸出電壓 三相	Rated Input Voltage of Control Power Circui	AC 380V, 50Hz, 3phas
主電路輸出電壓	Output Voltage of Main Power Circuit	8.8V～14.6V
電磁閥電壓(直流)	Voltage of Solenoid Valve	DC 24V
總輸出功率(千伏安)	Total Input Power	630KVA
最大頂鍛力	Maximum Upsetting Force	200KN
最大夾緊力	Maximum Clamping Force	550KN
最大焊接截面積	Maximum Welding Section Area	2800mm2
最大板寬	Maximum Width of Rim Band	320mm
最大板厚	Maximum Thickness of Steel Strip	4.5mm (up to 5.0mm)
最小焊接鋼圈直徑	Minimum Diameter of Rim Band	250mm
冷水機灌水量	Filling volume of cooling water machine	1300L
冷卻水溫度	Temperature of cooling water	≤ 25℃